Hi All!!! I have model SLP2CXASTE0760003. It has combined steering priority and brakes charge valve. It has a problem where there is no brake action, and no steering action. Steering only works if one of the working hydraulics commands are activated. I'm guessing this priority valve needs checking, but I just wanted to check if anybody had same problem and what was the cause? I was able to find that brake charge pressures are cut in 90BAR and cut out 110 bar. But I didn't find any info on LS pressure that comes from steering head. Anybody has this info? Thanks all!!
Took the priority valve apart, cleaned it up, and tested again. It charged brakes and steering started working. But after operating working hydraulics, it stopped working again. Like valve gets stuck. But I didn't notice anything unusual when I took it apart. Any ideas? Thanks!!!