Hi, i have a jcb js220 2006 to fit a rotating selector grab to. It has 2 way hammer lines for opening and closing the grab but nothing for rotate. I was going to put a 2 way solenoid on wired to 2 buttons on the joystick. The problem i have is where to get feed from for this solenoid i could get it from top of the pump but it would only work when another service is dead headed to load the pump. There is supposed to be a plug in the valve chest somewhere to take a feed from and it wil load sense to stroke up the pump does anybody know where this plug is?
Good day Irish If you go to exacted.org select Hydraulics - H" additional circuit this may help, we have a contact with some JCB information if you need this come back to us. Kind regards Uffex