With my bucket forks, it seems that i can't lift heavy load. The load is 2700 lb . I can only lift the pallet about 5 inches of the trailer. The hydraulic level is correct , would a plug hydraulic filter have anything to do with that issue.
Are they forks that flip over the existing bucket/slide over the cutting edge of the bucket or does your bucket come off and fork attachment goes on? If they are forks that flip over/slide over the cutting edge forks your lifting capacity will be greatly reduced because they stick so far out in front of the bucket. If they are an attachment you use in place of the bucket you may have an issue.
Yes the forks sits in front of the bucket. You are right . Thanks