Heavy Equipment Forums Heavy Equipment Community

JD 35D case drain??

ghitch75 ยท 2025-08-04 06:59

where would you tap in for a case drain for a mower?

Replies4
  1. #1mg23612025-08-05 05:08

    You would have to plumb the case drain back to the hydraulic reservoir. There should be some plugged ports on the reservoir you could use.

  2. #2ghitch752025-08-05 06:17

    thanks for the reply.....i have look everywhere on the tank and there is no extra ports......is there a line a could tee into?

  3. #3mg23612025-08-05 11:47

    Can you supply a photo of what lines you have attached to the tank?

  4. #4ghitch752025-08-08 21:49

    i got it going i teed it in to the third line coming from the swing motor into the return line back to the tank..... mowed down my drive with it for about 2 hours this evening worked just fine and no leaks.. thanks for the replies mg2361