Ive searched all over google etc. who makes a decent door kit for the ct322? Ive got an 04 and I need a door. Really looking forward to the incoming heat stroke ill have lol.. but its better then getting smacked in the face by a tree branch while bush hogging. 2) I have a 13 digit Vin.. Where can you do john deere vin look ups?? Or do I just go to a dealer and ask? Links to anything would be appreciated...Thanks in advance.
This would set you back $2300....OUCH!
Rather than a door, maybe just get some heavy wire mesh and just (for example) use bungie cords to hold it to the opening. That should be enough to keep the large stuff out. If you get a door, you’d want glass because the plastic/lexan stuff gets spider cracks in them over the years and makes it hard to see out in the sun or glare. The downside is that the glass may break if you’re getting large pieces of stuff thrown that way.
Machinerytrader.com scroll down to the bottom of the page and look under dismantled machines section or P/N lookup
"but its better then getting smacked in the face by a tree branch while bush hogging." A friend of mine was killed by a tree branch while clearing brush. $2300.00 is a lot cheaper than a funeral.
Bush hogging you're better off with a lexan or plexiglass door. Broken glass could be as bad or worse than having a branch or chunk of wood coming at you.
The door I show above in post #2 should be the demolition door which is one of those. Double check with your dealer first if you go that route.