Okay, so I've been snooping around JD's website the last couple of months, and I've seen the new K series machines. They set to be launched by Bell Equipment, no doubt at this year's Royal Agricultural Show, but what I would like to know is whether or not you all have any feedback on these machines? If so, what can you tell me about operator comfort and what not, engine and hydraulic performance, and so on? The bottom line is 'are they any better than the J series?' Thanks in advance.
Operator comfort is a little better, but overall very similar to the J series. Monitor is ten times better and their are added options that can be real assets to certain customers. There are actually a lot of new stuff that makes them much nicer overall. I will have to think about this one for a second.
Thanks for your input. Have you driven one/ operate one?
Went to school on them back in October. They are real smooth, plus the added 5th gear is awesome. Plus a manual torque converter lockup is pretty awesome also. Back up camera/sensor option. Push button start, the list goes on and on
Bellboy, Here is a list of what's new with the K-series...(I'm sure I'm going to miss something) LUTC (Lock up torque converter) option with 5-speed trans Imbedded payload system powered by Load Rite Integrated back up camera with RODS (Rear object detection system) Quad-Cool on all models T-III on all models Engine compartment light 4000 hr hydraulic filter interval (same as oil) 1000 hr trans filter interval Joystick steering option (544 - 824, std on 844) New model - 524 New cab with new pedal position and more leg room Improved visibility New LCD monitor with improved on board diagnostics New integrated load counter New 4 lever hydraulic control option Auto-diff lock option NeverGrease option available down to the 544 New steps and platforms (444 - 644) Improved HVAC Optional HVAC pre-cleaner for extremely dusty conditions New larger outside mirrors Optional heated rear mirrors Optional deluxe seat with leather bolsters Quick EVAC fluid change system option Fast fill fueling option Rear axle disconnect option TPMS (tire pressure monitoring system) option Standard keyless start with security Standard auto idle Standard auto shutdown Seat mounted hydraulic controls Improved hydraulic performance Much lower noise levels - in and out of the cab Standard axle cooling (744 - 844)
Love the engine compartment light.
Yup....that is the best feature of the entire new model line up. Anyone ever try to check the oil on an engine before the sun comes up? It is a pain in the arsh. Not on the K-series!!:drinkup
WOW! What a machine..... Deere really knows how to make me salivate...:naughty
Well-done. ***