Heavy Equipment Forums Heavy Equipment Community

john deere 310a clutch tool

sbarrett ยท 2016-12-15 19:11

i have been searching for the last couple of days on the web for a 310a clutch alignment tool without any luck,can anyone supply me with a part number or tell me how to get my hands on one,it,s a real pain trying to put my engine back in working in the yard on gravel,and i really want to make sure my clutch is lined up perfectly.thanks for looking, Steve

Replies4
  1. #1Tinkerer2016-12-16 07:16

    Is it possible to remove the pilot shaft from the transmission and use it ?? Be sure to check or replace the pilot bearing in the flywheel. make a phone call to the folks who own this website. ----> http://www.clutchtools.com/ag/index.php?categoryID=97&show_all=yes

  2. #2sbarrett2016-12-16 14:35

    thanks for the idea,i did call the ag store,they do not have one to fit,but i geuss i can take my forward clutch pack out and use it for my tool,thanks for the response.

  3. #3Billrog2016-12-16 14:40

    Probably get chastised for this comment but I've had better luck using a piece of broom handle that a pilot shaft for some reason. Maybe I was less careless.

  4. #4jimg9842016-12-16 14:57

    wood on a lathe worked for me can do pilot hole and clutch sizing