The brakes will not unlock , when we get them to release, dont have hydraulic functions ,,, any help or ideas would be appreciated thanks artimus
First, are there any codes, active or stored?
It says remote start connected , and that stays on ,, active codes are ecu 91.14 ecu 91.03 thanks artimus
If it says remote start connected you will not be able to release park brake or hydraulics. That is caused by throttle issues (usually a short, to power or ground). Both codes are for hand throttle out of range high. First thing I would do is check the connectors for the hand throttle, ecu and the foot throttle (even if your machine does not have a foot throttle). Look for moisture (the most common cause of this problem). Get yourself some electrical contact cleaner and some dielectric grease from any auto parts store. Clean the connectors I mentioned and then fill the cavities for the pins with the dielectric grease and reconnect. Try it to see if your issue is resolved or not.
WE WILL TRY THIS AND GET BACK TO YOU ,,, THANKS A LOT
How did you make out? If cleaning connections did not fix it look at the V1 diode in the top fuse block.