Group, I have this pedal in the operators station and it is hooked up to a cable that runs to the hydraulics. Pedal will not move. I have a service manual and operators manual and neither show this? Is it for a 2 speed for travel?
can you add a picture of where it connects to the control valve. It might be a straight travel pedal or possibly had an auxillary circuit at some point
And you might want to use a flash...lots of shadows there.
It doesn't look like a two-speed drive pedal; it looks more like a hydraulically controlled pedal (such as for travel/shifting or auxiliary hydraulics). If the pedal is stuck, it's usually due to a seized or rusted linkage or cable, or the hydraulic valve itself is stuck. It's best to take pictures of the connections before making any decisions.
Probably goes to auxiliary hookups.