Hi guys, wondering if any of you could help me. We just got a Kobelco SK160 MK4 and wanted to put aux hydraulics on it to run a breaker. I think this machine already has the extra port in that would take the plumbing but just wanted to double check with one of you guys if i have the right one. I have attached a picture. Is this the port that would be used to plumb the excavator? Cheers
hi, sure looks like that's the power beyond valve i was discussing with you on. you can add plumbing and activate that valve to open and signal at same time the "pop1" port to also turn on the pump flow. you may also want to include a hyd prs switch p/n GB50S00049F1 tee into other wiring of say attach prs switch so that when you activate it also raises the engine rpm off auto-decel too. adam