Heavy Equipment Forums Heavy Equipment Community

kobelco sk200lc mark iv

joereyno ยท 2023-11-01 11:15

anybody in south georgia have a kobelco sk200 series excavator that i might look at the hydraulic lines to be able to replace some that has melted on my machine

Replies9
  1. #1uffex2023-11-02 06:26

    Good day if you can post a photo of the lines in question we may be able to help. Kind regards Uffex

  2. #2joereyno2023-11-02 09:09

    some of the hoses and connections are under the pipes and at the end of the main control valve and i could not get pictures if you can tell me where these go that will help they are the new lines thanks

  3. #3uffex2023-11-02 11:57

    Good day It appears the majority are pilot - servo lines the attached may help.If you need any more please come back. Kind regards Uffex

  4. #4Welder Dave2023-11-02 23:18

    Some of the hoses look to have the wrong fittings crimped on them or the wrong hose for the fittings. There shouldn't be a wide space around the top of the crimp fitting and the hose.

  5. #5joereyno2023-11-03 03:56

    they are all i could get but they work just in the wrong place on one end

  6. #6joereyno2023-11-03 03:58

    thanks for the drawings but i still cannot see where each one goes

  7. #7uffex2023-11-03 05:47

    Good day joe If you know which lines are not correct I could get hold of a hydraulic schematic to help. Kind regards Uffex

  8. #8joereyno2023-11-04 02:20

    thanks i do know which lines are not connected please send me the schematic for the main control valve area thanks

  9. #9uffex2023-11-04 09:39

    Good day Joe Sorry I do not have that information, you could try Laucha a good guy for K information. Kind regards Uffex