I am having trouble with my sk70 I replaced a final drive. Did not touch wiring at all. When I went to start machine… nothing. No lights no click I shorted across main battery relay and dash lights come on and machine powers up but still won’t start I took out and tested ignition switch. It was not working on the meter Installed new ignition switch that tested good… no change in symptoms Reads 24.9v at input side of battery relay Reads 22.8v at ignition switch Any ideas or troubleshooting direction much appreciated
Traced it to power wire from fuse box to ignition. When I jumpered everything worked fine Running new wire and nix old. Good to go