Heavy Equipment Forums Heavy Equipment Community

kobelco sk70sr-1e codes

Billybob ยท 2014-07-31 14:28

kobelco sk70sr-1e, 2004 model, yt03-06021 recently just changed both travel motors and talked to the dealer about my boom idles down when i swing to the left was told to change the low pressure sensor on hydraulic line SE5 did that and did not help finally checked the codes and found E03, E06, E10 codes also my boom idles down when i boom straight out

Replies7
  1. #1finaldrive2014-07-31 18:33

    send me your email address and I'll send you the service manual

  2. #2finaldrive2014-07-31 18:45

    E03 = Boom Raise Pressure Sensor Error E06 = Arm Out Pressure Sensor Error E10 = Swing Left Pressure Sensor Error Corrective Action: Replace Sensor or check harness between sensor and controller for possible damage.

  3. #3Billybob2014-07-31 22:06

    [email protected] Thanks

  4. #4Billybob2014-07-31 22:08

    I changed the low pressure sensor SE5 do you know which sensor number those codes go to thanks

  5. #5finaldrive2014-08-04 09:12

    Serviceman's handbook sent. This is the one that contains the codes. Full service manual also sent.

  6. #6Mahadi2025-03-03 07:19

    Hello boss anyone know this code

  7. #7Mahadi2025-03-03 07:20

    Please ans me