Hi all, my D31a-16functions ok but the blade tilt goes much further to the left than the right. Its possible that the connecting link from the lever too the blade has been lengthened, but I have no way of telling that. Does anyone have an eye to eye measurement for the link to from the pivot arm to the blade? I read about bleeding the system but I'm not sure if or how this could cause this issue. Any help would be appreciated, cheers.
I’m having a similar problem with mine, except to the right. Check the angle cylinder lengths, measure the cylinder eye to eye length, then add them together. It should be 1760mm-1780mm I’m thinking it’s time for a cylinder rebuild.