hey guys , my tractor is tracking more to one side ,,,, is there a adjustment screw that I can adjust on one of the drive motors so that it ll track straight again an I want have to keep correcting it so itll walk inline
Is it a 21 or 21A , the 21 is PPV controlled and the 21A is electronic.
is just 21
Here is the travel deviation adjustment procedure: http://www.mediafire.com/view/odc1if2cnedl3xj/D39PX21_Travel_Deviation.pdf Best of luck.
thanks for the help my fellow Georgian
Did it just start mis tacking over the last little bit slowly getting worse? Maybe start by checking charge pressure?, and then a stall test to check the pump and motor condition, and if it's low then you will need to isolate the pump from the motor, could have a system failure starting, adjusting the deviation will just band-aid it.