i need to change the hydraulic oil filters on my pc228uslc. i got the two old filters off but they have no numbers on them. does anyone know what filters i should be running on it?
link belt ls3000 Does anybody know how to permanently improve travel problems with this machine. Is there a new improved brake linig for these drive shoes? mike Gunderson 715 257 7361
Hi , Does anybody know how to make a Link Belt LS3000 POSATIVELY drive, peramanently drive, I know about the talc and comet and vineger, temporery cures. Mike Gunderson 715 257 7361
What series is your 228 sledgehammer? The Wix website shows the hyd is a 51524 for the pc228uslc-2. Doesn't show a number for the -1 or -3. Have you tried calling a Komatsu dealer to get a filter number? If they can't help you, and you can get your hands on a Wix filter book, there's a section in the back of the book that you can sometimes find a filter by measuring the dimensions. I've done it before on these odd Japanese filters. BTW, sorry your thread got completely taken over with no regard by mmgunner. :beatsme mmgunner, welcome to the forum. :usa But seriously, if you want an answer to your question of what type of friction lining works best on the drums of your Link Belt, I think you would be hard pressed to find an answer from a thread that's asking a question about a Komatsu hyd filter, don't ya think? You'd have much better results if you would get your probationary posts over and done with at a test thread, there are several in the forum sub-sections. Then, when you become a Junior Member, you can start your own thread titled "what friction material for Link Belt drums". You'd probably have much better luck then.
mine is a -2 series, serial # 15035 it has 2 hyd oil filters, one is bigger than the other. yeah he hijacked my thread but when you're a n00b you aren't allowed to start new threads
Go to wix website http://www.wixfilters.com/index.asp Type 51524 in the quick search box on left side of page. That will take you to a page that has a link. Just click the 51524 in the middle of the page and that will take you to a page that has the filter dimensions. That way you can measure your old filter and see if this is the proper replacement.
right on thanks
My pleasure, hope it gets you the correct filters. :cool2
i was totally stumped on it--- there was a big filter and a small one. both cartridge style. couldn't find a replacement element for the small one for the life of me. called komatsu themselves and it's a komatsu add on. high pressure return for running scrub cutters and stuff like that. not standard equipment so it's not in any filter books.
the element in the hydraulic tank uses this part number 20Y-60-21510