Kobelco sk250lc VIN. LL08-U0416 It shows kpss disengaged on the screen. KPSS switch is in the normal position and the hydraulics are active with safety lock in the up position. Once motor and hydraulic system gets up to running temp the motor will stall when any movement of the controls are made. I have a shop manual but could still use a little direction. Thanks in advance!
Good day Heff From the thread you appear to have two issues that of a control lock out thats locked in the closed position and I would suggest check the engine out first to see if there is a power issue. Locate the lockout valve and check if it is functioning as intended. Kind regards Uffex