Heavy Equipment Forums Heavy Equipment Community

Kubota KX71 joystick rebulid

Harel ยท 2022-01-03 10:36

Hello all, 2014 KX71-3 , the joysticks are leaking. How do i take it apart in order to replace the seals? looks like the top joint is whats holding the plate but i would like to make sure before putting to much force on it. After disassembly , is there a source for replacement seals? the OEM are about $17 each ! Thanks, Harel

Replies5
  1. #1uffex2022-01-07 05:34

    Good day Remove retainer - prise the bush out renew Orings and replace. Kind regards Uffex

  2. #2Harel2022-01-07 05:48

    Thanks for your replay, The joint is whats holding the retainer? Any tip how to remove the joint with out braking it ? The joint doesn't really wants to come out. Harel

  3. #3uffex2022-01-07 08:37

    Hi Harel Normally these come out easily especially when they have been leaking fluid, Im inclined to suggest take hold carefully with grips give it a twist and riggle. I believe there is a Utube video showing the replacement of the seals give it a shot. Kind regards Uffex

  4. #4Harel2022-01-07 09:26

    Thanks, will try again. what about a source for replacement seals? The seals from Kubota ridiculously expensive. Harel

  5. #5uffex2022-01-07 10:12

    Hi Harel To the best of my knowledge we are talking nitrile O rings take you sleeve as pattern with the old seals to your local dealer for such stuff. Kind regards Uffex