We just purchase a new Kubota U35. Installing a mulcher (Beaumalight) on the accessory hydraulic circuit, what would be the best way to return the oil from the hydraulic motor of the mulcher to the oil tank with the less restriction? Is there a bypass or an easy modification ready built on this excavator? thank you for your reply! Ronald.
According to your Operator's Manual, setting the following valve to Hammer (1way), routes the return oil directly to the hydraulic tank. Now, if you have 3 hoses on your mulcher, you'll need to add additional "drain" plumbing. If your attachment only utilizes 2 hoses, just set the valve to Hammer.
Never mind. The MX330 doesn't use 3 hoses. Just set the manual valve to Hammer.
as @heymccall said, has your mulcher drain line? if available, drop your U35 & mulcher schematic