Bought this Raymond 770-R45TT off auction but it arrived with damaged shoulder bolts. These wheels are about 10.5" tall vs the low profile 5" load wheel. Was going to replace the bent bolts but was thinking of replacing these larger load wheels with a lower profile load wheel (5") like in picture 1 to fit under the pallet rack beams. Is there a reason why they're the larger load wheel type and is it ok if I replace it with the standard Raymond 7700 wheel plates like: https://fastliftparts.com/products/ra-1053385 (with appropriate 5" wheels) Thank you Photo 1 photo 2 photo 3
No replies yet.