Ayone have any experience bleeding the air from the drive system on one of these? Only owned this unit for a couple of months, the guy that it was purchased from said that it had to be bled prior to use otherwise the simtom was no forward or reverse. And unfortunately the previous owners contact info has gone missing. We had good luck if it was used every day just by raising and lowering the blade 5 or 6 times to get forward and reverse to work, after that it would drive normally for the rest of the day. I bought a manual online but no info on this procedure, there are a couple of filter housings in the related hydraulic diagram that will spit air and oil but im not getting any results. Tried bleeding them while at 1000ish rpms in nutral and in gear. Im stumped. Blade works great, unit pushed dirt no problem all day not lacking power, slipping or anything that would lead me to believe that there was a mechanical failure of any kind. Sat for a week now its not moving, Any ideas?
No replies yet.