Loader wouldn't start so i replaced the fuse in the ecu and now it starts but every time you put it gear it blows that fuse. pin #L-90V61060
Is it blowing the fuse as soon as you shift out of neutral? If the solenoids on transmision were all disconnected, and taped up if it blew the fuse again, you would know that there is a short to ground somewhere. If it does not blow the fuse with solenoids disconnected, you could meter the solenoids to see if one is grounded out or if the harness is maybe bad underneath the cover somewhere. Simon C
Could your problem also be in the vicinity of the shifter with something grounding out like a wire rubbed through. Simon C
On my L-90C there was some arcing in the shifter. Had to file down some of the casting where the arc was jumping to. Take it apart and inspect to rule it out.