Dozer sat for a few months. Had no power when I started it. Rats had chewed some wires to what I presume is the fuel pump. Is this the fuel pump? The wire at 11:00 shows 24 volts when the key is on. I presume the above wire goes to the wire in the 7:00 position. It's insulated about 1/4" all the way around. The other two wire stubs in the 1:00 and 4:00 seem to be grounds. Would I be correct to solder a jumper from the 11:00 to the 7:00 wire? I'm not sure what to do about the others. They are non insulated connections.
Contact Darinray at Dmmsales.com , [email protected] he works on these all the time . He is usually on this forum.