Heavy Equipment Forums Heavy Equipment Community

My New Trailer

maxamillion67 ยท 2011-02-05 16:25

Hear is my new trailer (new to me), it is a 1998 Donahue 24 foot with pop-up dovetail and two 7000 pound axles. I am going to use it to haul hay and my skid steer. Hope you enjoy the pictures.

Replies19
  1. #1tootalltimmy2011-02-06 02:56

    Looks like a nice trailer. Should work well.

  2. #2Mike Mc2011-02-10 01:57

    Nice trailer but it looks like your 2 5/16 ball is on the wrong side of the rear axle. We usually set up our balls 4-6" in front of the axle to transfer weight to the front.

  3. #3Mike Mc2011-02-10 02:01

    This picture shows it in front

  4. #4maxamillion672011-02-10 07:20

    I have the reese goose hitch, which has the rails so you can take it out and put in a fifth wheel hitch to pull fifth wheel camper. On the short box pick-up they reconmend it to be two inches behind the rear axles. If you pull a camper you have the clearance, and do not take out the back window when backing and making sharp turns. If it was just a 2 5/16 ball you could mount it ahead futher.

  5. #5mbvigil2011-04-03 23:57

    nice trailer...what does that dozer weigh?

  6. #6maxamillion672011-04-04 00:39

    Not sure what that dozer weighs but If I had to guess I would say 15000 pounds. The skid steer in the first photos weigh about 7500 pounds.

  7. #7OExcavating2011-07-10 02:11

    good eye

  8. #8MATTG2011-07-13 21:49

    Nice trailer.

  9. #9Erin Stewart2011-08-12 15:07

    How much did you pay to register it? The cost to register in Maine is very low versus most states and, most often, no sales taxes are due. For instance a 5 year plate costs $90. If a title is required, that is only $45. Something to think about. http://www.MaineTrailerRegistrations can help you with the process.

  10. #10maxamillion672011-08-12 20:20

    It cost $20.00 a year to license, $5.00 to transfer title and register it in my name and 5% taxes for the purchase price.

  11. #11jay427822011-09-18 20:28

    nice rig.i wish i would have kept my gooseneck

  12. #12jrich619932011-12-18 20:23

    nice trailer

  13. #13sckingranch2012-02-26 16:22

    Nice trailer!

  14. #14change00702012-02-27 01:00

    nice trailer. it is very different from china semitrailer.

  15. #15gunite2012-04-08 11:54

    Ke it off.O Nice trailer. Just wondering is it ok to leave equipment stored on a trailer for any length of time. I'm thinking its better to a

  16. #16Mike.580ck2012-12-24 00:13

    i used to work at a Trailer Hitch manufacturer in Chanute Ks, it was called Pop Up , we built hitch adapters for short bed pickups they replaced the pipe going inside and it had an extension welded on it , we made different lengths i believe six and twelve inches , but i also always like the ball a few inches in front of the axle thats the way it is in my short bed , i always feel better about hauling more weight with a gooseneck than a bumper pull anyways, i have a half ton four wheel drive and i haul my 13'000 pound backhoe with it on a gooseneck of course lol. nice trailer you have

  17. #17glenlunberg2013-06-20 23:01

    This is a nice trailer :drinkup. I wonder, What is the maximum weight that it can carry?

  18. #18busy dad2013-07-01 12:13

    Having the ball forward certainly helps keep the front axle loaded properly..I have often seen short box pick ups with not enough weight up front , despite having a gooseneck trailer.. Makes for a dangerous handling combination.

  19. #19semitrailer2013-11-27 06:00

    very good looking low bed.