Need a Stubby Radial Stacker Belt

Note: mobile (as in tow-behind ) conveyor belts can transport dirt from one end of the site to another - as in stockpile dirt. The reason I'm calling the radial stacker belt "stubby" is because one end of it has to be slender enough to fit under this SPECIAL trailer : It's called a "cold recycle" trailer. I just learned this trailer can function as two things : a mobile asphalt factory and a - what's called a "road recycling train". Basically, you link this thing via a trailer axle dolly to a cold planer, and as the cold planer grinds the road surface off, it transfers the ground up road to the recycle trailer and it screens and crushes at the same time to ensure all the road gravel is crushed to the same size. Then, it mixes the crushed old road with tar and water via a pugmill and the pugmill dumps the newly mixed cold asphalt via a hatch under the trailer and onto the road for a paver to pave the road again. Here, in this case, it's acting as a stationary cold asphalt factory. And after close analyzing, I discovered that radial stacker belt can fit - but one end of it has to be stubby enough for it to fit under the pugmill's hopper. This is a major benefit for the environment - as if things start to take a bitter turn for the wildlife, you can easily pack up shop and move it elsewhere to restore or remediate the area to it's former glory. So if you combine this CRMX 2 cold recycle train with that mobile radial stacker along with one of these self erecting storage silos , it will greatly be beneficial for the surrounding environment.