Heavy Equipment Forums Heavy Equipment Community

New guy first skid steer

John T24 ยท 2025-03-05 13:05

Awaiting arrival of a New Holland "fixer upper" I expect a lot of cussing and spitting along the way.... LX865 turbo (hi flow)

Replies14
  1. #1MarcusZ19672025-03-05 13:13

    Welcome to HEF John! Those can be fun! (fixer-upper)

  2. #2John T242025-03-11 18:41

    Is this Bad?

  3. #3Steve Frazier2025-03-11 21:10

    FUBAR If that's all that's wrong with it though you're in good shape

  4. #4reganj2025-03-11 21:26

    If you can not fix it with a hammer, you have an electrical problem.

  5. #5materthegreater2025-03-11 21:38

    Top quality scrap metal

  6. #6MarcusZ19672025-03-12 06:20

    Someone let the magic smoke outta that one!

  7. #7DDoug2025-03-12 07:44

    Was this machine sitting submerged for a time ?

  8. #8John T242025-03-12 07:54

    NO

  9. #9funwithfuel2025-03-12 19:10

    That looks like a buncha fun. Welcome

  10. #10John T242025-03-13 07:54

    It's keeping me busy. Did a lot of cleaning up on the machine .... removed about 50 tons of horsesh*t when I dropped the rear skid plate... Damn Farmers.... my suspicion is the start relay stuck and continued to trigger the solenoid... causing the starter to stay running after the machine fired up. new parts on the way....

  11. #11funwithfuel2025-03-13 08:02

    And the engine will turn over by hand?

  12. #12John T242025-03-13 08:28

    yes

  13. #13funwithfuel2025-03-13 09:52

    That sounds like an all around sweet deal then. Congratulations on your "fixer upper"

  14. #14John T242025-03-16 15:05

    got the old girl running today. took a while to bleed the air from the lift pump.... seems to idle nice.... getting a puff of white smoke on deceleration.... otherwise.... seems good.