Hey guys, I recently changed wheels and tires on my 655D backhoe and I was looking for a torque wrench to put them back to spec; fronts were 150 ft. lbs. and the rear were 400 ft. lbs. Anyway I found this wrench at Summit Racing and its really a nice piece with a storage case. I also used this last week after repacking one of my stabilizers and re-torqued the gland back to spec at 500 ft. lbs. Summit also had the gland tool that adjusts between 2"-6". I did fab up my own pins to fit the pin holes tighter but it worked great for removing and installing the gland. Torque wrench 100 to 600 lbs. about $190: https://www.summitracing.com/parts/wmr-m204 Gland wrench: https://www.summitracing.com/search?SortBy=BestKeywordMatch&SortOrder=Ascending&keyword=OTC 1266 Hope this helps someone else out there looking for a solution.
No replies yet.