Good day! I have bought pc60-7 and the problem is it overheat about 45minutes to an hour or work and hydraulic oil is hot. No bubbles in radiator, no leak. I read some threads here and find maybe its the setting of the hydraulic pump too low/high. Thanks in advance.
If its the hydraulic pump. How to adjust and where to put the hydraulic pressure gauge. Im still new to this. Thank you
Is it the engine that's indicating over heating? If so when was the oil last changed? These questions come from an experience with a PC40 that hadn't had an oil change in over a year of continual use. An oil change fixed that problem.