Heavy Equipment Forums Heavy Equipment Community

Project backhoe attachment

Ltcmikesr ยท 2024-10-20 18:19

Still trying to id the maker of this backhoe attachment

Replies7
  1. #1Tyler d4c2024-10-20 18:42

    If the boom cylinder is in the boom and the swing is done with a hydralic motor of sorts id say its a international harvestor. In witch case find a torch and make it in to little pieces. Theres no parts to be had for the swing mechinisim. And it is way to big to hook to the front of a skid loader if thats uour intentions

  2. #2davo7272024-10-20 23:29

    Massey had some backhoes with a swing motor that looked like a big drum that had a big paddle looking thing inside.

  3. #3Toolslinger2024-10-21 15:42

    Doesn't look like any of the Massey's I've seen. Mount is wrong, and the bracket on the back of the boom that the cylinder is tied to is wrong. That kinda looks like International.

  4. #4MarcusZ19672024-10-21 16:56

    Looks like the hookup would fit a IH TD340.

  5. #5Tyler d4c2024-10-21 19:36

    Only photo i could find

  6. #6Ltcmikesr2026-05-24 13:12

    Looks lije cause i know it was. Not for a tractor too heavy and beefey

  7. #7Deere500a2026-05-24 13:41

    I'll guess old front mount trencher with cable reel on boom,small bucket & no outriggers