G'day guys got a SK210-6 the thing stalls out if you push it into full throttle but if you leave it at idle it is fine only when you put some load onto it , it will stall out now some one told me the step motor but it has plenty of fuel and is not thirsty i was thinking that maybe i need to be looking at a solenoid valve what you guys think?
look up the kobelco excavator post and ask on there with your machines serial number and model the kobelco guy that runs it will give you lots of helpful info for your machine. i have a 200 and the stepping motor had to be replaced and i guess thats a common issue. maybe look into that or check your fuel filters and lines and make sure you dont have a leak or a clogged filter.
hi, if you try to keep to my " kobelco hydraulic excavator " post i will be e-mail when a new post is submitted. the general post i created saves me time then searching new topics. i can then respond quicker. as mentioned in the above post i can be of service. but i also require the serial number of the machine as well. thx adam