i started a new thread as i found the problem i was having on my mustang 345 not moving.where do you guys take your drive motors for rebuilds or is it not worth it and buy new.my motors are not available thru the dealer anymore so im looking for suggestions.i have one motor not turning. also the small chains on each side of the drive assebly were missing everything was there but the smaller chains that attach to the drives.the manual calls for #.50 chain.does this mean any .50 chain will work or is that the only option.what is the best way to size and cut the chain as i have no chain to go off of. Thanks in advance!
No replies yet.