Hello again everyone, I know I haven't posted any pictures of my fleet (C.M.E. or Crab Mass Excavations) for a very long time so here are some. Hope you all enjoy! This first project was one of two jobs in which we had to build an area where a housing development was going to be built. The area around the 'street' was to be raised and it was to be a dead end. Pic 1 and 2: Moving the original pile of clay with the 365C FS and loading it into our 725 which dumped it in the area where our development was to be. The D10T was used to push the clay into a pile resembling to shape that the development was meant to be. The 24 finished off the shaping and cleaned up the area where we had been working.
Here are a few more: The 330Dl and the 374D were busy pulling extra material up off the sides of the pad to even the height as we compacted with the 825H. This is one from the beginning of the project, taken at night I thought you might enjoy More to come in the next few days
Sorry to take so long guys, I have been really busy with assignments and such, more pictures soon!
Ok, so here are some other photographs from misc. projects. The 5110B bringing up piles for a residential housing project. 365Cl Face Shovel loading up my 725 with material ready to be spread and compacted into a dirt road which had to be raised a few meters, however the road was 1 km away... Misc work on a bridge project. The 924G lifting some pipe into place. More pipe lifting. I hope you all enjoyed my posts If anyone wants to see any projects in full or more pictures then just say so!