still trying to find out if this is normal. it looks like a pretty big slot on the hydraulic pump where the small fork on the angle sensor goes. just trying to confirm if the hole looks correct on my pump. here's the pictures. looks like there's a small piece missing maybe? just looks like a large oval hole where the a/s shaft goes and would have a lot of moving play for such a critical part. pictures below. http://i27.photobucket.com/albums/c...23C6D8C7-703-000001347DEEED88_zpsd112d95c.jpg http://i27.photobucket.com/albums/c...D829F52C-703-0000013477D61E77_zps7144f5a6.jpg
There is a small "U" shaped spring clip that goes over the end of the sensor tab that fits in the slot on the pump.