cant get coolant plug loose on 2007 t190. Is there an alternative to draining most of coolant?
Welcome to HEF, Mike ! Doesn't it have a drain valve ? Here is a link to the manual. https://www.manualslib.com/manual/555859/Bobcat-T190-S-N-531711001.html?page=106
No valve
OH No ! Could you explain the drain plug situation Mike ? There are ways to deal with them. Rounded off hex ? Or was it a four flat instead of a hex ? 3/8 pipe plug ?
Hex. Behind oil filter and motor mount Just can’t get to it very well
Just one? Is there another on the other side of the block ? Six point socket or box end wrench only on it, if you do decide to go after the one behind the motor mount.
It’s a Allen hex
Can’t find another one so thats my question Water pump bolt maybe and let it leak out there
Or could I just pump it out from top
Just loosen off the lower rad hose. Been there done it many times.