Heavy Equipment Forums Heavy Equipment Community

Takeuchi Tl240 dead

senpai01 ยท 2024-07-27 12:30

Hello i would like assistance on a takeuchi that's dead. A client has a dead takeuchi tl240 which wont turn on or start. We replaced the ignition switch thinking it would be the issue but sadly not. I checked all the fuses and relays as they seem okay. But at some point it, the machine turned on, tried cranking i heard the relays click then it died again. What could be the issue? As i been trying to look for a service manual to troubleshoot

Replies7
  1. #1Vetech632024-07-27 12:38

    Sounds like a battery or machine ground issue. Check and clean all battery connections and grounds, charge battery and try again.

  2. #2senpai012024-07-27 12:45

    Checked and cleaned the battery terminals... Also checked the machine ground for any corrosion or damage

  3. #3senpai012024-07-27 12:46

    Also battery is in good condition

  4. #4bccat2024-08-11 23:50

    Starter ?

  5. #5heymccall2024-08-12 00:31

    Fusible link? Look like fuses. Like in this thread HeavyEquipmentForums

  6. #6heymccall2024-08-12 00:35

    Part 2-9

  7. #7senpai012024-08-12 08:35

    Ues you are correct we found out that the starter cable was damaged and we changed it...and it runs really good