Jumps out of gear, its worse in reverse or when accelerating! Have went through shifter and spring was good, found no problems! Pulled selector valve did find it was sticking, clean and polished spoils, was some groves from wear! Put back together and shifts easier, but still jumps out of gear! When in gear pushes great with trans pressure! Have to hold shifter to keep it in gear! Has anyone ever had this happen before?
What did the back end look like, the detent part with the 4 balls, spring, detent cam rod screwed into the back end of the spool? Or am I looking at the wrong machine?
It looked good! Checked travel and specs on spring all good!