IH Td7e, I’ve noticed clean oil coming from an open hole at the bottom of the flywheel housing, this hole is threaded with paint in the threads so I assume it’s been open for quite a while, I’m thinking torque converter input seal leaking or the converter itself maybe, the op manual mentioned a vent, I have no vent that I can find, but there is a plugged hole in the converter housing just behind the dash panel, any ideas or opinions?
Just for future reference in case it may help someone, some td7 dozers have a vent in the converter and some don’t, mine didn’t, I installed a vent and I still have a leak at the flywheel housing, I believe it is the front seal of the converter, I’ll be removing the converter and resealing it when I get a chance.