Heavy Equipment Forums Heavy Equipment Community

Torque specs

Logger72 ยท 2019-04-24 07:45

I have a D-4C Hystat Series 3, I removed and repaired the final drive on the right side, does anyone know what the torque specs are for the sprocket segments? Thanks

Replies4
  1. #1Shimmy12019-04-24 08:40

    Bang them tight with a good impact.

  2. #2Nige2019-04-24 08:59

    Depends on the bolt diameter. For 1/2" bolts tighten to 90 lb ft, for 5/8" tighten to 180 lb ft.

  3. #3Logger722019-04-24 11:45

    Thank you sir, That was the info I needed, trying to do things right the first time rather than having to do over!!

  4. #4DB22019-04-24 21:16

    Make sure mating surfaces are free of any dirt paint etc or it will be impossible to keep them tight