Hi all, My transmission light occasionally flashes on the dash so i checked the tranny pressures today. The main pressure and clutch pressures were in spec but lubrication and tourque converter pressures came in low. Do i need to be worried at this point or just keep an eye on it. Machine has around 14000 hours on it. Seems to shift ok. I changed the oil on it maybe 100 hours ago. Strainer was clean and filter media was ok when i cut it open.
As things wear out the pressure normally will go down. Some springs get tired in time and since they usually can't get them they force you to shim the spring to increase tension. Not familiar with your machine, just saying. Could be a pump on way out, could be adjustment to prevent relief from popping off too early. Simon C
I would you refer you to my post about this topic. It took me a lot of time and searching to find what started out as this problem.