Well, getting around to finally using my 580 K Extenda Hoe Series 1. Awfully wet to try and get any real work done. But the one thing I noticed is that the extenda boom section is extremely loose when extended. Who has replaced the wear strips? Do you have pictures? Where did you buy the strips? Does anyone have the dimensions of the strips? Are they Teflon? Thanks in advance!
They are available from Case, as are shims to go behind them to take up for wear.
At this point I think the wear strips are missing. Anybody re install them?
There are no wear strips on the inner part of the dipper. It's shimmed with fiber plates and shims on end of dipper. Check your parts book for correct shims and plates.
Anybody got the parts book for a 580 K 1st series?
So it looks like you can only see the wear plates when disassembled? Anyway to tell if they are still in there without disassembly?
You can look it up at www.partstore.casece.com
This takes you right to it. https://partstore.casece.com/us/par...1fa923f070e02bff&sl=EN¤cy=#epc::mr54945