Hey Guys I’ve got a Hitachi ZX330-3 with a Isuzu 6hk1 Not starting, Checked fuel filters, lines,lift pump. Checked can bus resistances and all powers and grounds, Checked resistance on SCR valve , Checked resistance on common rail sensor all ok and within spec WinDR is showing no faults This has me stumped I should add I checked the stop switch (down near the floor) and it’s working and there are no e-stops if anyone asks That’s caught a few out I know! Any help would be greatly appreciated
What’s the rail pressure ?, at cranking speed, I believe minimum is 30 mpa.
Yeah on windr is reading 30mpa