Heavy Equipment Forums Heavy Equipment Community

319d throttle drop out

Sunnybuck ยท 2022-04-03 23:53

I have a JD 319d and sometimes when adjusting the hand throttle it will throw these codes and go to an idle. If i shut it off and start it back up the codes go away until next time i mess with the hand throttle. Seems like it happens at around 3/4 throttle. ECU 29.14 ECU 29.04 EMU 523694.04 Pin: 1T0319DJJCG225998 Any ideas what could cause this issue?

Replies6
  1. #1mg23612022-04-04 05:38

    These 2 are for the foot throttle.

  2. #2Sunnybuck2022-04-04 07:29

    If i unhook the foot throttle will that stop the issue?

  3. #3mg23612022-04-04 11:53

    Probably not. Try it anyway.

  4. #4Sunnybuck2022-04-04 12:21

    I did and no change. So is the only way to fix this is with new foot throttle? They are expensive from the dealer.

  5. #5Sunnybuck2022-04-04 22:25

    Is the foot throttle repairable?

  6. #6mg23612022-04-05 04:46

    You can replace just the sensor. But, before doing that, you have to make sure your wiring form the sensor to the ECU is good.