this may sound like a really stupid question, but lately my oil pressure light has been flickering after about 20 minutes of use. i by mistake pulled off the rear right access panel and discovered that the sensor on the hydraulic filter was leaking badly and that by grounding it out i could make the oil pressure light come on. i have since discovered that my oil pressure switch is by the oil filter and it also shows signs of leakage. my question is 1/ are these 2 circuits connected and secondly do you remove the skid plate to replace the oil filter and replace the sending unit. ..these may sound like stuoid questions but this is my 1st machine and i am still waiting for my manuals to arrive . thank you in adsvance sam
No replies yet.