Hello all, working on my 580ck gas with mechanical shuttel shift. I was adjusting the governor linkage to the carb trying to get rid of the bog under load problem. well the governor rotated freely before i started now seems to be stuck in the all the way back position. It feels like i rotated it back to far and it hung up on something inside. Any help would be greatly appreciated. Are the front overs a pain to remove? Thank you in advance.
Ok, update on this. decided to pull front cover off. got everything off except crank pully bolt, is it right or left hand thread. i broke my 1/2 breaker bar on it going to the left. thanks