Hello, SR80,high speed kicked out into low while in motion a couple of times. Now it doesn't go into high but still seems to operate normal in low. Fuse is good. Any idea's on what is wrong? My manual doesn't tell me much. I had a starter problem at this time that I suspect might be part of this problem. It was engaged while the engine was running and smoked the starter. I have installed a push button and new power wire to start machine and this works good now.
Update. I swapped the high flow and the 2 speed solenoids and tried out machine. Nothing changed,still no high speed. I checked for voltage at the 2 speed solenoid connector and have 0 volts on either wire holding the 2 speed button and not with engine running. So I have a wiring problem. Anyone have any ideas for me?