Hello gentleman! How much pressure is in the 1/4" line that comes from the pattern selector? I need to replace the line from the selector to the valve body. Its a 1/4" line and rotted out. Where it enters the body the fittings are seized. So i was hoping that I could get someone to my house (cant move machine) to splice into the hose and make a joint (removing the rotten section) to avoid dealing with the seized fitting. The area is extremely tight and not sure what else to do. Looking online it says there is a union from the valve body to the hose so maybe i can cut the hard line and then replace the union and complete hose. just little scared to proceed for fear of more damage. Any help would be great!
Good day Firetech According to my information the relief is adjusted to 365 p.s.i. if you said 400 you must be on the safe side. Kind regards Uffex