New to this Forum..and recently acquired used Bobcat 773 and the hour meter does not work, and I do not have a manual. Can anyone suggest some troubleshooting for this. Is the hour meter connected to the starter switch or somewhere else. Thanks:usa
send me your s/n and a fax #. i will fax the wiring diagrams from my new manual.
if its an f with the roll type its probably bad and replace the hour meter its self check for power and ground first but if it has both and are good its more than likely the hour meter seen many of them go out if its a g series its a new left ahand panel for you
check for power and a good ground at the hour meter while unit is on.most likely bad meter
If it is an older F series, the hourmeter got it's power from the charge pressure switch next to the hyd. filter, IIRC
It gets it's ground not it's power from the charge pressure switch. Checked to see if it's leaking from the switch. If it is that is your problem.
new panel I have a slightly used left panel in full working order if you decide to try a new one $125.00. $10.00 shipping.
Need Hour meter.. Wondering if you still have the left side hour pod?? Bobcat 753G.. Thanks,Jeff
i have a new left panel for our 500,000 edition 773 turbo sitting around. i think we paid an excessive amount for it.