Hey everyone, picked up a Bobcat 853, has the aux connections by the bucket. Trying to run an auger, so would need continuous flow forward and reverse. The led on the board lights up as if it is powered, and with the front-facing switch I have continuous flow forward on the auger. But no reverse. I switched the button on the back side of the stick, after reading that it switches direction on some, but no effect. I played with several combinations but there is just no sign of any life going the opposite direction. Does the 853 even have continuous flow reverse? Is there something I should check that could be stuck or disconnected? (I looked at some wiring but don't see anything out of place) Or am I missing something here? Thanks!