Machine: Samsung SE210-2 Pump: Kawasaki K3V112DT-1RCR My hydraulic schematic shows 2 x screen filters in the pilot circuits at 24 & 25. I’m assuming 25 is in the pilot gear pump? And if so should I tackle it from the discharge port?
24 apparently sits before the 3 x solenoid valve block however I can’t see where it would be. There is a Pilot joiner block between the gear pump and the solenoid valves, could it be in here?
Good day Lagwagon I believe you are subject to some low quality hydraulic schematics, 24 is located in the servo pump at the head of the relief valve see attached those others are simply screen filters in the actual nipples that attach the tubes. Kind regards Uffex