Heavy Equipment Forums Heavy Equipment Community

Case 130cx fault codes

Markmc1996 · 2022-06-20 18:21

Hey there Iv got a case 130c excavator throwing all sorts of codes up on dash? Photos of codes to follow It sometimes brings on the wiper by itself and has also the swing motor brake on all the time also The only way I get to work machine is to leave the swing solenoid disconnected back at main Hyd pump Has anyone got any troubleshooting diagrams to diagnose if it is my main dash that’s my problem or one of the other ecus? also is it possible to clear codes on these machines without the need of scan tool? Thanks

Replies8
  1. #1Markmc19962022-06-20 18:22
  2. #2BigWrench552022-06-20 19:37

    I don't know what those codes mean, but if you have that many active codes at once. I will be checking grounds and harness connections.

  3. #3William Taylor2022-10-31 22:19

    I have the same type excavator with 02 code showing, anyone know what it means. It will not crank now. Turns over but does not crank.

  4. #4LACHAU2022-11-01 05:47

    There are many CX130 Models!!! Which model do you want to know???

  5. #5LACHAU2022-11-01 05:54

    Here is the CX130C fault code list.

  6. #6Coaldust2022-11-01 20:09

    The Case 130 is a hellluva machine. But, sometimes the idler falls off. Does your idler ever just fall off?

  7. #7William Taylor2022-11-01 22:54

    It is a CX 130C serial number 1GDHK34N3RE566346. My operator was digging a canal when the bank caved in. Engine is on down side with rain coming. engine will not crank now.

  8. #8Coaldust2022-11-01 23:22

    Holy Moly! We really need a picture of that. Shame on the mess. Get the operator out of the cab, first. Then take a picture.